Manual Pipe Cold Cutters Hinged & Rotary UAE Qatar Saudi
-
1 Day delivery all over UAEOct 27 - Oct 31
Manual Pipe Cold Cutters Hinged & Rotary UAE Qatar Saudi
Fully manual cold pipe cutters that snap pipe off squarely with no sparks, no debris and no heat — no hot-work permit needed. Cut steel, cast iron, stainless, galvanized and ductile iron from 1" to 36". 13 models across hinged and rotary families. Supplied across the UAE, Qatar, Saudi Arabia and wider GCC.
Need powered pipe cutting? See our Split Frame Cold Cutting & Beveling Machines (DW-89 to DW-1830) — hydraulic / pneumatic / electric, cut & bevel in one operation.
Product Overview
What They Are
Dynaweld manual pipe cutters cover every pipe cutting need from 1" to 36" across two technologies — hinged pipe cutters for smaller diameters and rotary pipe cutters for large-diameter work. All models produce cold cuts with no sparks, no debris and no heat, making them ideal for hazardous environments, noise-free zones, and confined spaces where hot-work permits are not available.
Who Uses Them
Pipefitters, mechanical contractors, plant maintenance crews, plumbers, and shutdown teams across oil & gas, petrochemical, water, HVAC and general construction throughout the UAE, Qatar, Saudi Arabia, Kuwait and Oman. Essential where hot work is restricted or where a clean, square, weld-ready cut is needed without a grinder.
Where They Are Used
In ditches, underwater, overhead, and in pipe racks — no restriction on orientation. Used for pipeline tie-ins and repairs, plant maintenance in live areas, food-grade and hygienic pipework, and any site with no electrical or fuel supply. Fully manual and field-portable — carry it anywhere.
Four Cutter Families — 1" to 36"
Hinged Pipe Cutters
1" – 12"
H2S · H4S · H6S · H8S · H12S
Hinged frame clamps around the pipe, cuts with just 90–110° rotation for tight quarters. For steel, cast iron and stainless. Lightweight and portable.
Low Clearance Rotary Cutters
2" – 18"
RCH4S · H10S · H14S · H18S
Low-profile ring cutter needs only 127mm (5") clearance. Slip-on handle, 45° rotation. Cold cut large-diameter steel and stainless in close quarters.
Rotary Pipe Cutters
18" – 26"
H22S · H24S
For 18–26" pipe with only 5" clearance. Long-handle leverage snaps pipe squarely before wheels penetrate halfway. 45° minimal rotation.
Heavy Rotary Pipe Cutters
28" – 36"
H30S · H36S
Ratchet split design for 28–36" steel pipe. High-strength heat-treated alloy blades. Neat weld-prep cuts without additional grinding.
Hinged Pipe Cutters — Ordering & Specs (1"–12")
Capacity by Material
| Model | Steel Pipe Size | Steel Wall | Cast Iron Size | Cast Iron Wall | SS Pipe Size | SS Wall |
|---|---|---|---|---|---|---|
| H2S | 1"–2½" | 2.9–5.16mm | 1"–2½" | 2.9–5mm | 1"–2½" | 2.9–5.16mm |
| H4S | 2"–4" | 3.18–6.02mm | 2"–4" | 3–6.02mm | 2"–4" | 3.18–6.02mm |
| H6S | 4"–6" | 4.7–7.11mm | 4"–6" | 4.78–7.11mm | 4"–6" | 4.78–7.11mm |
| H8S | 6"–8" | 7.04–8.18mm | — | — | — | — |
| H12S | 8"–12" | 7.04–8.18mm | — | — | — | — |
Packing & Weight — Hinged
| Model | Package | Package Size (cm) | Gross Wt. | Net Wt. |
|---|---|---|---|---|
| H2S | 1 pc / carton | 46.5 × 17 × 7.5 | 3.5 kg | 3 kg |
| H4S | 1 pc / carton | 60.5 × 23 × 10 | 7 kg | 6.5 kg |
| H6S | 1 pc / carton | 75 × 32 × 11 | 10 kg | 9 kg |
| H8S | 1 pc / carton | 85 × 39.5 × 12 | 12.5 kg | 12 kg |
| H12S | 1 pc / carton | 59 × 69 × 30 | 30 kg | 20 kg |
Rotary Pipe Cutters — Ordering & Specs (2"–36")
Capacity — Rotary & Heavy Rotary (needs only 127mm / 5" clearance)
| Model | Family | Pipe Size | Wall — Standard Wheel | Wall — Thick Wall Wheel |
|---|---|---|---|---|
| RCH4S | Low Clearance | 2"–4" | 3–6.4mm | — |
| H10S | Low Clearance | 6"–10" | 9.53–15.09mm | 9.53–19.05mm |
| H14S | Low Clearance | 10"–14" | 9.53–15.09mm | 9.53–19.05mm |
| H18S | Low Clearance | 14"–18" | 9.53–15.09mm | 9.53–19.05mm |
| H22S | Rotary | 18"–22" | 9.53–15.09mm | 4.78–19.05mm |
| H24S | Rotary | 22"–26" | 9.53–15.09mm | 4.78–19.05mm |
| H30S | Heavy Rotary | 28"–34" | 9.53–15.09mm | 4.78–19.05mm |
| H36S | Heavy Rotary | 32"–36" | 9.53–15.09mm | 4.78–19.05mm |
Packing & Weight — Rotary
| Model | Package | Package Size (cm) | Gross Wt. | Net Wt. |
|---|---|---|---|---|
| RCH4S | 1 pc / carton | 61 × 22 × 11 | 6 kg | 5.5 kg |
| H10S | 1 pc / plywood case | 110 × 42 × 16 | 23 kg | 20.8 kg |
| H14S | 1 pc / plywood case | 118 × 36 × 16.5 | 25 kg | 23 kg |
| H18S | 1 pc / plywood case | 114 × 64 × 21 | 30 kg | 28 kg |
| H22S | 1 pc / plywood case | 101 × 88 × 25 | 55 kg | 33 kg |
| H24S | 1 pc / plywood case | 139 × 90 × 27 | 67 kg | 45 kg |
| H30S | 1 pc / plywood case | 101 × 88 × 25 | 155 kg | 133 kg |
| H36S | 1 pc / plywood case | 139 × 90 × 27 | 162 kg | 140 kg |
Complete Model Reference — All 13 Cutters
| Series | Model | Pipe Size Range | Gross Weight | Net Weight |
|---|---|---|---|---|
| Hinged | H2S | 1"–2.5" | 3.5 kg | 3 kg |
| Hinged | H4S | 2"–4" | 7 kg | 6.5 kg |
| Hinged | H6S | 4"–6" | 10 kg | 9 kg |
| Hinged | H8S | 6"–8" | 12.5 kg | 12 kg |
| Hinged | H12S | 8"–12" | 30 kg | 20 kg |
| Rotary | RCH4S | 2"–4" | 6 kg | 5.5 kg |
| Rotary | H10S | 6"–10" | 23 kg | 20.8 kg |
| Rotary | H14S | 10"–14" | 25 kg | 23 kg |
| Rotary | H18S | 14"–18" | 30 kg | 28 kg |
| Rotary | H22S | 18"–22" | 55 kg | 33 kg |
| Rotary | H24S | 22"–26" | 67 kg | 45 kg |
| Heavy Rotary | H30S | 28"–34" | 155 kg | 133 kg |
| Heavy Rotary | H36S | 32"–36" | 162 kg | 140 kg |
- 1"–36" Full Range
- Cold Cut — No Sparks
- No Debris / No Noise
- Fully Manual
- Wall Up to 19.05mm (Thick Wheel)
- Any Orientation
- 13 Models
Key Features & Benefits
Cold Cutting — No Sparks
No heat, no flame, no sparks — so no hot-work permit is required. Safe for gas, oil and chemical environments and live plants where flame cutting is prohibited across GCC oil & gas facilities.
No Debris / No Noise
Clean, square cut with no swarf or metal filings — ideal for noise-free zones and food-grade environments. Nothing to clean up inside or around the pipe after cutting.
Square Cut Every Time
The pipe snaps off squarely before the cutter wheels penetrate even halfway — producing a precise, weld-prep-ready joint with no additional grinding or facing needed.
Any Orientation — Ditch & Underwater
Can be used in ditches, underwater, overhead, and in congested pipe racks with no restriction on orientation — perfect for pipeline tie-ins and awkward field positions.
Fully Manual — No Power Needed
No electricity or fuel required — completely manual and field-portable. Works anywhere, including remote sites with no power supply. Nothing to charge, fuel, or maintain.
Thick Wall Option
H10S and larger models accept optional thick-wall cutting wheels for pipe walls up to 19.05mm — simply change 2 rollers to the thick-wall wheels for heavy-wall pipe cutting.
Frequently Asked Questions
What is the difference between a hinged and a rotary manual pipe cutter?
A hinged pipe cutter opens on a hinge, clamps around the pipe, and cuts with just 90–110° rotation — ideal for smaller pipe (1–12") in tight quarters. A rotary pipe cutter is a ring of cutter wheels that rotates around the pipe, cutting with only 45° of movement per stroke — designed for larger pipe (2–36"), including low-clearance situations needing just 127mm (5") of space. Both cold cut with no sparks or debris.
Why use a cold cutter instead of a grinder or flame cutter?
Manual cold cutters produce no sparks, no heat, and no debris — so no hot-work permit is required, making them safe for gas, oil and chemical environments, live plants, and confined spaces. They give a clean, square, weld-ready cut with no swarf, ideal for food-grade and noise-free zones. Being fully manual they need no power or fuel and work in ditches, underwater, overhead and in pipe racks with no orientation restriction.
What pipe materials can these cutters handle?
Steel pipe, cast iron pipe, galvanized pipe, ductile iron pipe, black iron pipe and stainless steel pipe. Hinged models H2S–H6S carry rated capacities for steel, cast iron and stainless. Wall thickness ranges from ~2.9mm up to 15.09mm with standard wheels, and up to 19.05mm with optional thick-wall wheels on H10S and larger.
What size range do the Dynaweld pipe cutters cover?
1"–36" across 13 models: Hinged H2S (1–2.5"), H4S (2–4"), H6S (4–6"), H8S (6–8"), H12S (8–12"); Rotary RCH4S (2–4"), H10S (6–10"), H14S (10–14"), H18S (14–18"), H22S (18–22"), H24S (22–26"); Heavy Rotary H30S (28–34") and H36S (32–36").
How do I get a price for Dynaweld manual pipe cutters?
Send us the models, sizes and quantities you need on WhatsApp +971 55 697 6535 and we will reply with pricing, availability and delivery time.
Manual Pipe Cold Cutters Supplier in the UAE & GCC
Global Hardware & Tools LLC is a Dubai-based supplier of Dynaweld hinged and rotary manual pipe cold cutters and cutter wheels for projects across the UAE (Dubai, Abu Dhabi, Sharjah), Qatar (Doha), Saudi Arabia (Riyadh, Dammam, Jeddah, Jubail), Kuwait and Oman. For pricing and availability, WhatsApp +971 55 697 6535.
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.